Q: How
long does an existing home inspection take?
A: You
should allow between 2 to 3 hours for the inspection with the possibility of
extra time needed to investigate unusual or extra buildings.
Q: How
long does a new home inspection take?
A: A new
unoccupied home usually takes between one to two hours.
Q: What
does the inspector look at?
A: The
inspector will look at the general condition of the exterior walls, roof, and
foundation. The attic and crawl space, if access is available, the electrical
panel, heating system, and plumbing. This is a visual inspection and does not
entail disassembling any components or cutting any coverings.
Q: How can I save
money on my inspection?
A: Sometimes a buyer
can ask for a "walkthrough" . This is an full inspection but no written report
is generated.
Q: Do I need to be
present during the inspection?
A: Yes, Active
Inspection will not only inspect the property but also educate you on the
condition of the property. This is best achieved in person.
Q: What should I tell
the seller about the inspection?
A: Before the
inspection the seller should know that the inspector will be entering the attic
and crawlspace. If stored items are blocking the access they should be moved,
including clothing if the access is in the closet. The inspector will remove the
electrical panel cover and will try to test as a many outlets as are accessible.
Pilot lights on heating appliances should be lit. And, of coarse, water and all
utilities should be on.
After the inspection,
the report will be given to you the buyer. It is your decision as to how much or
how little you wish to share with the seller.
Our
service area includes Palmer, Wasilla, Big Lake, Caswell, Goose Bay,
Houston, Kashwitna, Knik, Meadow Lakes, Montana Creek, Sutton, Talkeetna,
Trapper Creek, Willow, Chickaloon, Eagle River, Chugiak, Glenallen, Copper
Center, Kenny Lakes, Valdez, Glacier View, Petersville, Peters Creek, Eureka
Roadhouse, Caswell, Tazlina, and other Alaskan communities.